Independent appraisal · All 93 Nebraska countiesinfo@nebraskainsuranceappraiser.com+1 (844) 537-1427

Free calculator

Roof Square and Pitch Converter

Most hail claims start with a roof measurement. Enter each section’s flat footprint and pitch to see roof squares, order quantities and whether steep charges may apply.

Roof square & pitch converterUp to three roof sections
SectionFlat footprint (sq ft)PitchSquares
0
0
0
Footprint area is the flat area the roof covers, overhangs included. Measure from a plan, an aerial report or a tape.
Total roof squares (before waste)0
Roof surface area0
Squares to order (with waste)0
Shingle bundles (3 per square)0
Steepest section—
Rough replacement cost—

For planning only. Results depend on the figures you enter and your policy’s terms. They are not a quote, an appraisal or legal advice.

The math

A roofing square is 100 square feet of roof surface. Because a pitched roof is longer than its flat footprint, each section’s footprint is multiplied by a pitch factor: the square root of 1 plus (rise ÷ 12) squared. A 6/12 roof uses a factor of about 1.118; a 10/12 roof uses about 1.302.

Why sections matter

Many Nebraska homes combine a steep main roof with a lower-pitch garage or porch. Treating the whole house as one pitch can understate or overstate the total. Entering each section separately gives a more accurate number to compare with the carrier’s measurement report.

Waste and steep charges

Waste covers cutting at hips, valleys and edges. Steep pitches and tall eaves often carry additional labor charges in estimating software. If your roof is steep and the estimate shows no steep or high charges, ask why.

Questions about this tool

Where do I find my footprint area?

From building plans, an aerial measurement report, county assessor sketches or a tape measure around the eaves.

What pitch triggers steep charges?

Estimating software commonly adds steep charges starting around 7/12 or 8/12, but practices vary by carrier and estimate.

Does this replace a measurement report?

No. It is a check, not a substitute for a professional measurement.

More free tools

Want a professional to check the numbers?

Send your estimate and we’ll review it line by line.